New 2015 Carbon Triumph Target Archery Arrows Now At Eagle Archery LLC
New Easton Carbon Triumph Target Arrows are available with both G Nock and Super Nock bushings so target archery shooters can use the nock system of their choice.
- The Easton Carbon Triumph is engineered for superior accuracy and performance. With the maximum allowed diameter for World Archery competition, in every spine size, the Easton Carbon Triumph is the way to go. Available in 4 different sizes, 2 nock systems, and 5 point weights, the Easton Carbon Triumph Target Shaft is versatile to fit every competitive bow style and required state of tune.
- The Triumph target shaft has an internal armor system that provides a natural advantage in front-of-center balance, creating an even more stable and accurate arrow without compromising dynamic spine.
Triumph Features:
- Straightness: +/- .002 inches
- Weight Tolerance: +/- 1 grain
- All sizes at World Archery maximum allowed 9.3 mm outside diameter
- Black, smooth matte finish
- Multi-layer wrapped carbon fibers
- Uni Bushings included, nocks and points are sold separately.
Note:Triumph shafts are precision-cut and squared at the front end of the shaft for optimal point alignment and fit, and should only be cut from the rear before the nock system installation and assembly. Cutting the shaft at the point end will reduce the effectiveness of the internal armor system and potentially decrease durability in hard targets. This will void warranty.
Cutting Instructions:Use only a high-speed, thin-blade pro shop saw for cutting Triumph shafts. NOTE: Cut shafts ONLY from the rear, designated by the printed gold band. DO NOT cut the end with the aluminum armor core.
Point Installation: Triumph shafts are compatible with the use of Easton low-temperature hot melt cement for point installation. Easton recommends use of a gel-type cyanoacrylate for UNI bushing installation, and a small drop of hot melt for installation of PIN Nock adapters.
Triumph Features:
- Straightness: +/- .002 inches
- Weight Tolerance: +/- 1 grain
- All sizes at World Archery maximum allowed 9.3 mm outside diameter
- Black, smooth matte finish
- Multi-layer wrapped carbon fibers
- Uni Bushings included, nocks and points are sold separately.
Note:Triumph shafts are precision-cut and squared at the front end of the shaft for optimal point alignment and fit, and should only be cut from the rear before the nock system installation and assembly. Cutting the shaft at the point end will reduce the effectiveness of the internal armor system and potentially decrease durability in hard targets. This will void warranty.
Cutting Instructions:Use only a high-speed, thin-blade pro shop saw for cutting Triumph shafts. NOTE: Cut shafts ONLY from the rear, designated by the printed gold band. DO NOT cut the end with the aluminum armor core.
Point Installation: Triumph shafts are compatible with the use of Easton low-temperature hot melt cement for point installation. Easton recommends use of a gel-type cyanoacrylate for UNI bushing installation, and a small drop of hot melt for installation of PIN Nock adapters.